Once the Vendetta2 has been properly mounted and secured, the power button will need to be secured to the grip in a position that is comfortable for you. We recommend using cloth tape to secure the button to the front portion of the grip. Be sure to secure all portions of the wire in a manner that will eliminate any contact with all moving bow components such as the arrow, arrow rest, bow string and drop-away rest trigger cord.
Read this entire section thoroughly prior to proceeding. Aligning the Vendetta2 at distances greater than 20 yards can significantly improve performance in the field. Proper alignment of the Vendetta2 with your sight is absolutely critical to proper performance in the field. To ensure exact alignment and compensate for the offset between the Vendetta2 and your sight, be sure to read and understand the entire alignment process before beginning.
To properly align the Vendetta2 with your sight, two measurements must be taken and applied during the alignment process. The goal is to align the Vendetta2 visible alignment laser with your top sight pin, so that your top pin becomes your alignment mark to range targets. Use a ruler to measure the Vendetta2 offsets. In the graphic below Fig. In the graphic below, this measurement is 2. The combination of these two measurements shows the total offset between the visible alignment laser and the top pin of your sight.
These measurements will be critical to achieving proper alignment of your Vendetta2 and should be taken as carefully as possible. To accurately align the Vendetta2 with your bow, you must first determine the offset of the Vendetta2 to the sight pins. Using the example above, the Vendetta2 would be to the left of the top pin when viewed from behind in a firing position. Place the alignment aid on a large, safe backstop and position yourself an appropriate distance from the backstop.
We recommend making initial alignment corrections at 20 yards, then verifying alignment at 40 yards if possible. Activate the visible alignment laser by pressing and holding the power pad for 10 seconds. If the Vendetta2 has previously been activated, allow it to sit idle until it has powered down, then begin the activation process for the visible alignment laser. Safely come to full draw and aim your top pin at the center of the alignment aid.
Using the red dot created by the visible alignment laser, make note of which direction the Vendetta2 must be adjusted to place the red dot in the center of the circle you created on the alignment aid.
To deactivate the visible alignment laser, press and hold the power button for 5 seconds. The visible alignment laser will automatically deactivate 5 minutes after activation.
Note: For best results, align the Vendetta2 at the longest distance possible. With the laser dot alignment system, you can be sure that your Leupold Vendetta 2 will be dialed in for precise yardage reading. Using the Leupold Vendetta 2 To use the Leupold Vendetta 2, power up the device by pressing the button once. Once powered up, draw your bow back and decide whether you want a single distance reading or a continuous scan reading.
For a single distance reading, land your 20 yard pin on your target and press the button once. For a 40 second continuous scan reading, hold the button down for 3 seconds and release. We took to the range with the Leupold Vendetta 2 and compared the displayed yardages with the actual measured yardages. The Leupold Vendetta 2 was dead on.
Its excellent design delivers accurate distances at full draw with the simple press of a button. No more dipping into your pocket and having to raise your rangefinder to your eye. The Vendetta 2 eliminates animal alerting movement, gives you accurate distances when it matters the most, and will skyrocket your success rates. The Leupold Vendetta 2 Rangefinder is a must have for any hunter who wants to stay undetected and deliver a lethal, accurate shot in the field.
Part Simply press the trigger pad for an instant reading at full draw. This product has been discontinued and is no longer available for purchase. Search products in the same Archery. Product Features. Features Rangefinder - Bow Mode. Bow mode uses the distance and the angle of a shot to calculate a ballistic equivalent to the target for more accurate uphill and downhill archery shots. LED displays use a red numbers and letters and have adjustable brightness settings to optimize readability in changing light conditions.
0コメント